Fire Station & Emergency Services Facility Roofing in Manchester, NH

When a station alarm sounds, all rooftop work stops immediately. Tools are secured , no loose equipment that could fall during apparatus door operation. Crew clear the roof zone above and adjacent to the apparatus bay within 60 seconds. The crew chief confirms the clearance zone is clear and gives the "bay clear" signal to the duty officer before any bay door begins to open. Crew remain off the bay-adjacent roof sections until the apparatus has departed and the duty officer gives the all-clear. This protocol is in writing, briefed to every crew member on day one, and practiced during the pre-mobilization walkthrough.

Station staffing levels are not our responsibility to maintain , but we make sure our construction activity never impairs them. Crew quarters access, kitchen, day room, and all sleeping areas remain fully accessible throughout construction. HVAC and utilities serving occupied crew areas are not interrupted without written prior approval from the station commander. Any work that temporarily affects a station utility , electrical for a power tool connection, water for a membrane rinse , is coordinated with the duty officer on duty at the time of the work.

The station commander and the duty officer receive a written work plan before the start of each work day, including: which roof zones are active, what equipment is on the roof, the alarm clearance protocol reminder, and the estimated crew-off-roof time for that day. For stations with multiple shifts, the work plan is updated before each shift change. We don't surprise fire station personnel with changes to the construction activity , everyone on duty knows what's happening above them at all times.

Each bay door has a defined swing radius , we map it from the structural drawings or by direct measurement during the pre-construction walkover. The clearance zone for each door is kept completely free of equipment, materials, and personnel at all times during the work day, not just when an alarm sounds. If the daily scope requires work within the clearance zone, that work is scheduled for periods when the duty officer has confirmed no alarm is expected , which is never completely predictable, so we keep the clearance zone clear as a constant baseline condition.

Multi-day incidents that extend the station's out-of-service period , or that draw additional apparatus and personnel to the station from mutual aid , may require a temporary construction suspension to free up the station's operational capacity. We include a construction suspension protocol in the project plan: how work is stopped, how materials and equipment are secured, and how work restarts when the incident is resolved. The decision to suspend construction during a major incident is made by the station commander , we implement it without objection.